Marposs Bio Metrology Marposs Radio Transmission Scanning Probe for On-Machine Part Measurement Parts can be checked for defects without being transferred to a measurement lab Published: Monday, October 8, 2018 - 12:00 Comment Rss Send Article (Must Login) Print Author Archive (Marposs: Auburn Hills, MI) -- Marposs announces the availability of its WRSP60 high-accuracy scanning probes for checking part profiles directly on machining centers and milling machines in real time. Parts can be checked for defects without being transferred to a measurement lab, eliminating the need to reload and reposition the part for any necessary reworking, improving the process and optimizing cycle time. The WRSP60 probes can be used to check the quality of the part profile, compensate for part misalignment, perform surface deformation checks that provide compensation information for the cutting program, perform comparisons with the master, check the run out, and enable the “touch” necessary for positioning the part; operations that are impossible with touch probes or that would result in greatly increased cycle times. The system transmits the data via radio to a WRI receiver using a communication protocol that offers excellent immunity to interference and reduced power consumption. The data are collected, analyzed, and displayed by a proprietary Marposs’ software package. The WRSP60 also features a multichannel system that enables the same receiver to manage up to 12 systems sequentially, including Marposs WRS part-contact probes. These scanning probes have a transmission range of 15 meters, making them well-suited for large machines. They provide measurement performance on 3D surfaces with unidirectional repeatability within 0,4 µm and a better life of 80 hours continuous operation. For more information on the WRSP60 probe, download a brochure. The Mida Diamond family The WRSP60 is part of the Mida Diamond line of high-precision, machine-tool touch probes and tool setters designed to control every step of the production process. Advantages of the Mida Diamond probing line include reduced machining and checking times, increased production efficiency, reduced production rejects, and constant machining quality level during the entire production process. Complete information about the high-precision Mida Diamond probing line can be found at www.marposs.com, or by contacting Marposs Corp. at (888) 627-7677, or by email to marposs@us.marposs.com. Marposs’ WRSP60 scanning probe can perform profile and surface measurement of components directly on the machine. Quality Digest does not charge readers for its content. We believe that industry news is important for you to do your job, and Quality Digest supports businesses of all types. However, someone has to pay for this content. And that’s where advertising comes in. Most people consider ads a nuisance, but they do serve a useful function besides allowing media companies to stay afloat. They keep you aware of new products and services relevant to your industry. All ads in Quality Digest apply directly to products and services that most of our readers need. You won’t see automobile or health supplement ads. Our PROMISE: Quality Digest only displays static ads that never overlay or cover up content. They never get in your way. They are there for you to read, or not. So please consider turning off your ad blocker for our site. Thanks, Quality Digest Discuss ( 0 ) Hide Comments Comment About The Author Marposs Marposs supplies precision gauging equipment to industries worldwide for measuring to the thousandth of a millimeter in the workshop environment, production lines, and on board machine tools. Main customers are machine tool manufacturers, automotive and their subcontractors, aerospace, bearings, glass, electrical motors, appliances, consumer durables industries, and gauge and fixture makers. Marposs supplies individual gauging components, turnkey machines, or fully automated lines. Headquartered in Bentivoglio, Italy, Marposs’ U.S. office is in Auburn Hills, Michigan.
(Marposs: Auburn Hills, MI) -- Marposs announces the availability of its WRSP60 high-accuracy scanning probes for checking part profiles directly on machining centers and milling machines in real time. Parts can be checked for defects without being transferred to a measurement lab, eliminating the need to reload and reposition the part for any necessary reworking, improving the process and optimizing cycle time.
The WRSP60 probes can be used to check the quality of the part profile, compensate for part misalignment, perform surface deformation checks that provide compensation information for the cutting program, perform comparisons with the master, check the run out, and enable the “touch” necessary for positioning the part; operations that are impossible with touch probes or that would result in greatly increased cycle times.
The system transmits the data via radio to a WRI receiver using a communication protocol that offers excellent immunity to interference and reduced power consumption. The data are collected, analyzed, and displayed by a proprietary Marposs’ software package. The WRSP60 also features a multichannel system that enables the same receiver to manage up to 12 systems sequentially, including Marposs WRS part-contact probes.
These scanning probes have a transmission range of 15 meters, making them well-suited for large machines. They provide measurement performance on 3D surfaces with unidirectional repeatability within 0,4 µm and a better life of 80 hours continuous operation.
For more information on the WRSP60 probe, download a brochure.
The WRSP60 is part of the Mida Diamond line of high-precision, machine-tool touch probes and tool setters designed to control every step of the production process. Advantages of the Mida Diamond probing line include reduced machining and checking times, increased production efficiency, reduced production rejects, and constant machining quality level during the entire production process.
Complete information about the high-precision Mida Diamond probing line can be found at www.marposs.com, or by contacting Marposs Corp. at (888) 627-7677, or by email to marposs@us.marposs.com.
Marposs’ WRSP60 scanning probe can perform profile and surface measurement of components directly on the machine.
Quality Digest does not charge readers for its content. We believe that industry news is important for you to do your job, and Quality Digest supports businesses of all types.
However, someone has to pay for this content. And that’s where advertising comes in. Most people consider ads a nuisance, but they do serve a useful function besides allowing media companies to stay afloat. They keep you aware of new products and services relevant to your industry. All ads in Quality Digest apply directly to products and services that most of our readers need. You won’t see automobile or health supplement ads. Our PROMISE: Quality Digest only displays static ads that never overlay or cover up content. They never get in your way. They are there for you to read, or not.
So please consider turning off your ad blocker for our site.
Marposs supplies precision gauging equipment to industries worldwide for measuring to the thousandth of a millimeter in the workshop environment, production lines, and on board machine tools. Main customers are machine tool manufacturers, automotive and their subcontractors, aerospace, bearings, glass, electrical motors, appliances, consumer durables industries, and gauge and fixture makers. Marposs supplies individual gauging components, turnkey machines, or fully automated lines. Headquartered in Bentivoglio, Italy, Marposs’ U.S. office is in Auburn Hills, Michigan.
© 2022 Quality Digest. Copyright on content held by Quality Digest or by individual authors. Contact Quality Digest for reprint information. “Quality Digest" is a trademark owned by Quality Circle Institute, Inc.